Top 25 Affordable 3D Printer Under $1000 2017

3D Printer BY Amanda 0 340

Top 25 Affordable 3D Printer Under $1000 2017

A decade years ago, 3D printer was very expensive and out-of-reach for common people. Nowadays, you can easily find affordable 3D printers under $1000 thanks to the technology. There are 25 best affordable home 3d printers in this article, and each of them can make your imagination a reality.

1. Dobot Magician

Dobot, based in Shenzhen, China, researches and creates affordable 3D printer-- Dobot Magician, which is very light and portable. It’s roughly 10 pounds. What’s great about this printer is that it’s WIFI enabled. The printer has been shown to be very accurate and steady with 4-axis and 0.2mm repeatability. What’s more, Dobot Magician can achieve dual-color printing in just 5 minutes.

Price: $999.00

2. Dremel DigiLab 3D20

The Dremel is fully assembled 3D printer that works out of box. It weights about 15.4 pounds and max volumes of 292 cubic inches. And the Dremel 3D software is compatible with both .OBJ and .STL files. But there’s one limit for this printer, that is the Dremel 3D20 can only use Dremel PLA filament, other filament may cause damage to the machine.

Price: $899.00

3. Flashforge Dreamer 3D Printer

The Fashforge dreamer is created specially for those who want a high-end 3D printer but don’t mind paying a little more. Its plastic frame is durable and the design allows you to see all the internal parts and the printing process. A verity of 3d Filaments such as ABS, PLA, HIPS, PVA, Nylon and more can be applied in this 3D printing. Although affordable, the set-up of Flashforge Dreamer 3D Printer is a big challenge for beginners.

Price: $ 899.00

4. QiDi Technology X-One 3D Printer

QiDi X-One is a complete 3D Printer, it has been fully assembled and calibrated before delivery. The users, even green hands, can operate it right out of box. The X-One has a heated aluminum build platform, which can be heated to 110, and supports printing any type of filaments such as PLA, ABS, PVA and more. This affordable 3D printer is featured with a 3-inch touch screen.

Price: $699.00

5. TEVO Black Widow 3D Printer

The black widow is based on the Prusa i3 with a massive 370’’×250’’×300’’printing area. All parts of this 3d printer are open-sourced, you can require any part which is readily available. The power installed inside is a power unit enclosure along with the main board and LCD panel display for local control. There’s a SD card slotted to the power unit enclosure, which allows printing without connecting to a computer.

Price: $549.95

6. RepRap Guru Prusa i3 V2

The RepRap Guru Prusa I3 V2 affordable 3D printer, and has an 8"x8" heated build area topped with a piece of borosilicate glass. It includes the 2004 LCD w/ SD card reader allowing the user to print from a SD card without connecting a computer. The V2 frame is constructed of 1/4" premium cast acrylic accompanied with plastic injected molded parts for precision fitting and a sleek professional look. It’s an economic and cost effective solution for anyone who looking to get into 3D printing world on a limited budget.

Price: $349.99

7. Printrbot Play 1505

Printrbot Play 1505 is a all white assembled 3D printer with a volume of 4 x 4 x 5 inches, and 1.75mm PLA filament is available. The printing head moves on the X-axis(left to right) and Z-axis(up to down), while the bed moves on the Y-axis(backward to forward). The printing bed is a metal plate and includes an auto-leveling probe that works with a open-sourced software. Micro-USB cable and micro SD card allow the affordable 3d printer for home works without connecting computer.

Price: $333.25

8. New Matter MOD-t

New Matter MOD-t is an elegant but simple desktop 3D printer, providing high quality and stability 3D printing service for average people at home and in the classroom. Printing area of this affordable 3d printer is 6 x 4 x 5 inches and multiple parts can be pieced together to create much larger objects. The MOD-t is ultra low maintenance, highly consistent and Wi-Fi enabled, allowing you to print directly from any device.

Price: $406.00

9. Polar 3D Printer

Polar coordinate design yields larger printing volume (8.0 Diameter x 6.0 Height inches) from a small footprints (300 cubic inches). It can connect with WIFI, Ethernet, and USB so that you can print from any device with a web browser. And with an open-view, this affordable home 3D printer allows you to watch the printing process. It can provides affordable 3d printing service for classroom or maker-lab.

Price: $802.75

10. Monoprice Maker Select V2

Monoprice Maker Select 3D Printer V2 includes heated build plate, Gb Card and Sample PLA filament. Softwares such as Simplify 3D, Repeater, and Cure are compatible in this affordable 3d printer for home. The large 8 x 8 inches build plate and generous 7 inches vertical space means that you can 3D print larger and more complex models. If you want to make your ideas and designs from paper or CAD files come into reality, Monoprice may be a good solution.

Price: $399.00

11. XYZprinting da Vinci Jr. 1.0 Pro

As an affordable 3D printer, the da Vinci Jr. 1.0 Pro provides standard 3D printing service for professional users with the build volume of 5.9'' x 5.9'' x 5.9''. It has adjustable temperature settings for the extruder nozzle, making it compatible with 3rd party 1.75mm PLA filaments. The great point of this 3D printer is that it has adjustable software settings, which allows users change the nozzle and print bed temperature, speed, print support and retraction settings.

Price: $399.99

12. Up Mini 2

UP mini 2 is a great leap compared with the first generation with advanced features of usability, portability and connectivity. WIFI connection supports it enabling better user control of the 3D printer through mobile APPs. And the power failure protection allows resume print where the last print is stopped.
The UP mini 2 is an affordable home 3D printer for people who want to start 3D printing in no time and with the build volume of 4.7" x 4.7" x 4.7".

Price: $577.00

13. Wanhao Duplicator 4S 3D Printer

This China made 3D printer is compatible with makerbot and makerware. It comes with the max printing speed of 1000mm/min, and can print objects of 225×145× 150mm3. This affordable 3D printer sustains max temperature 266 with optional filaments such as ABS and PLA. This 51.9 pounds item is a good start for 3D printing both in studio and in classroom.

Price: $775.00

14. Sintron Prusa i3

Many new designs make Sintron Prusa i3 an affordable 3D printer. The first is exclusive Anti-Backlash design for Z axis makes the movement very quiet and stable and more accurate in printing. The second is energy-saving. Sintron Prusa i3 consumes only 1/3 energy of ordinary 3d printers and customers don't need to heat the bed, therefore no worries about fire accident. The third is that Sintron has made wires with corresponding suitable length for each plug. However, this 3D printer only supports PLA as suitable filaments.

Price: $300.00

15. Geeetech Rostock M301

Based on open source design with 2 spools on the head, Geeetech Rostock M301 is a desktop and affordable 3D printer. Users can apply this 2-in-1 printer to create more colorful objects. But it requires filament to be loaded in all 2 feeds even if you are only printing with color, otherwise that one color will loosen out the other sockets and makes the printing unsmooth. Its arm length is 8 inches and bed diameter is 8.5 inches.

Price:$498.00

16. M3D Micro 3D Printer

The Micro is a consumer 3D printer with the features of affordable and accessible. Collocating with its user-friendly software, it can be easily applied into use for the users needn’t to install it. Unlike other 3D printers, there’s a non-heated print bed in Micro so that it can be a good choice for children to use.This 3d printer comes with the features of max printing area 2.9” x 3.6” x 3.3” and printing height 4.6’’. 1.75mm filaments such as PLA, ABS, HIPS and Nylon are supported on Micro, but wooden filament and metal filament are not supported.

Price: $299.00

17. Monoprice Select Mini 3D Printer

Monoprice Select Mini is featured with ready to print out of packing box. There’s no need to install it, for it has fully assembled before shipping. The heated plate and wide range of extruder temperature allows this printer to work with any type of filament, from basic filaments such as ABS and PLA to advanced materials such as conductive PLA, wood and dissolvable PVA. The print dimensions of this printer is 4.7" x 4.7" x 4.7". Monoprice Select Mini supports affordable 3D printing service for everyone.

Prince: $220.00

18. HICTOP Prusa I3

HICTOP Prusa I3 is an affordable home 3D printer assembled with automatic leveling and open source software. It is outfitted with an extruder, so it will auto-level itself by measuring and adjusting the distance between the print nozzle and the heat end. There’s no need for manual adjustments. It comes with the printing volume of 10.6" x 8.3" x 7.4" and supports to print more than one filaments such as PLA, ABS, wood, flexible, Nylon and Hips. Printing speed of this 3D printer is 30-90mm/s.

Price: $339.99

 

19.  Robo C2 Smart 3D Printer

Featuring a compact size, Robo C2, an affordable home 3D printer has a fast print speed of 300mm/s and a large printing area of 5 x 5 x 6 inches. With a built-in touch screen as well as WIFI and mobile App connectivity, it is fully compatible so that you can print objects fron IOS devices. The Robo C2 is one of the smallest and most portable 3D printers in the current market. It brings a high-quality and easy-to -use solutions to users. It supports over 20 materials including a majority of Robo legacy materials, including PLA, carbon fiber, wood, metal infused, and flexible material. Robo C2 can be applied at home or in classroom for it weighs only 2.2 pounds.

Price: $725.43

20. Robo 3D R1 Plus

Robo 3D R1 Plus is a little more expensive than its last generation, Bobo C2, but it still a cost-effective 3D printer. It is fully assembled and calibrated so that it can print right out of box. It comes fully equipped with SD card which allows users to print directly and no longer need to plug 3D printer via USB.The heated print bed prevents uneven cooling and warping of printed parts, and automatic calibration and bed leveling ensures precise prints.This affordable 3D printer has a massive build volume of 10 x 9 x 8 inches. Many different specialty filaments are supported such as PLA, ABS, Nylon, and metal materials.

Price:  $1000

21. Flashforge Creator Pro

Flashforge Creator Pro is structured with all mental frame, which makes it more stable than its last generation--a wooden frame. Among with a crowded of affordable 3D printers, Flashforge Creator Pro is highlighted with its powerful software FlashPrint which is developed by engineers. The users don’t need to buy expensive aftermarket software.The new front door is pre-installed, and has been re-designed to provide easier access to prints; the new injected PC top cover comes in one solid piece, which makes it stronger and more effective at regulating temperature. SD card or USB is available so that it can print smoothly without connecting with computers or smart-phones. it has the build volume of 225 x 145 x 150 mm. ABS and PLA are suitable filaments for this affordable 3D printer.

Price: $899.00

22. Printrbot Simple Pro 3D Printer

Printrbot Simple Pro 3D Printer appeared on the market in 2016,which stands alone in a crowded affordable home 3D printers. It is elegant with all withe. Its structure allows you to watch the printing action from any angle for its has no box. Printrbot brings ease of control to a new level with a built-in color touch screen, WiFi and a free, optional, cloud service. The smooth, speedy motion of Printrbot Simple Pro is mesmerizing without any jerks and wobbles. This 3D printer takes the complicated mysteries of 3D printing and makes it simple for classroom or individual makers.

Price: $948.00

23. Velleman K8400 Vertex 3D Printer

The Velleman Vertex 3D printer is easy to handle and affordable for average people. It is a type of open-sourced printer and can easily make modules on paper or CAD files be reality. It provides affordable 3d printing service for K12 and maker studio. The maximum height is 7.8" and its  printable area is 180 x 200 x 190 mm.

Price: $649.99

24. Anet A8 - Prusa i3 DIY 3D Printer

Anet A8 is a little heavier home affordable 3D printer with the weight of 19.842 pounds. It is able to print a variety of filaments such as PLA, ABS, HIBS and PC. Anet A8 boasts a large print area  and very capable NEMA17 motors to navigate the print-space. It comes stock with a versatile extruder and heated bed, which makes it capable of printing a diverse selection of filaments. This product doesn’t need assembling, but comes with up-to-date video instructions.

Price: $205.00

25. Beagle Mini

Beagle Mini-Delta reprap 3D printer is a better choice for you if you’re a green-hand in 3d printing world. As an introductory printer, this basic version has a build volume of 170mm diameter ×150 mm height. And the only suit filament for this mini affordable home 3D printer is PLA.

Price: $334.00

COMMENTS:0 340 0
Comments . 0