| Operating Voltage | 7.4V |
|---|
| Control Board | DuDuino Mega2560 (compatible with Arduino Mega2560) |
|---|
| MPU : | ATmega2560 |
|---|
| Battery: | 18650 Li-ion rechargeable battery |
|---|
| Ultrasonic Measurement Range : | 30mm-1000mm |
|---|
| AI-Starter Size: | 195mm x 172mm x 79mm |
|---|
| AI-Starter Weight: | 810g |
|---|
| Maximum Load: | 500g |
|---|
| Tire Diameter: | 67mm |
|---|
| Operating Environment: | 0℃-40℃ |
|---|
| Programming Software: | Arduino IDE, Mixly |
|---|
| Communication Interface: | USB communication / Serial communication |
|---|
| Expansion Interface: | 4PIN general I / O interface x 2 |
|---|
| Sensor: | Ultrasonic sensor x 3 / Color sensor x 2 / Infrared sensor / Geomagnetic sensor x 1 / Light sensor x 1 |
|---|
| Motor Parameters : |
|---|
| Reduction ratio: | 48:1 |
| Voltage | 7V |
| No-load current | 150mA |
| Stall current | 150mA |
| Maximum rotate speed: | 200r/m |
| Encoder resolution ratio | 585pulse/r |
