5.3.2        Debugging the Power of Dobot M1

Prerequisites

Ÿ   You have powered on Dobot M1.

Ÿ   You have connected Dobot M1 and an emergency stop switch.

Procedure

Hold down the power button in the base of Dobot M1 for about 5 seconds, and then release your fingers. If all LED indicators are off and Dobot M1 moves down automatically, Dobot M1 is powered off successfully.

NOTICE

You cannot hold down the power button to power off Dobot M1 until Dobot M1 is in the running state (when the green LED indicator is blinking). If Dobot M1 fails to be started, you must force to power off Dobot M1.

 














 Issue V1.2.1 (2019-04-10)User GuideCopyright © Yuejiang Technology Co., Ltd