3.3.1        Installing Laser Engraving Kit

Figure 3.3 shows the laser kit.

Figure 3.3  Laser kit


Step 1         Install the laser kit on the end effector and tighten the screws of the laser kit using 2.5# hexagon wrench.

Step 2         Connect the connector of the laser kit to the Forearm I/O interface, as shown in Figure 3.4.

Figure 3.4  connect to Forearm I/O interface


 Issue V1.2.1 (2019-04-10)User GuideCopyright © Yuejiang Technology Co., Ltd