FAQ
FAQ
- Sliding Rail KitWhat should I do if the linear rail is moving erratically?
If you cannot control the motion of the linear rail when both the linear rail and its logo on the Dobot Studio are on, please check the power cable to see if it is plugged in or not.
- Sliding Rail KitWhat should I do if the homing position of the linear rail is abnormal?
If the linear rail is in the position as shown in the following picture, you can control its movement through Dobot Studio. If it cannot go back to the original homing position, zero in the machine.
Note: The position of the Dobot will default to the homing position at soon as it is powered on. First, press Home to move the Dobot into the homing position and then begin operations.
First, press Home to move the Dobot into the homing position and then begin operations.
- Sliding Rail KitWhat should I do if the Linear Rail begins to write abnormally?
For example: the linear rail writes in reverse order.
A: The linear rail writes in the reverse order when the completed PLT file is inputted through Dobot Studio.
The correct writing order starts from the last stroke of the last character, shown in the following example.