General version
-
-
-
-
This is the touchpad firmware for MOOZ-1/2 and MOOZ-3. We are constantly improving the UI of touchpad for better user experience. Updating the touchpad firmware is optional for now, we will let you know if the touchpad firmware must be updated to support features of the new mainboard firmware.
- Cura is an open source software designed by Ultimaker, it is a 3D printing slice software. Every model you design for print must be translated by slice software into instructions your 3D printer will understand. If you need a 32bit version, please access to Ultimaker’s official website for downloading.
- Cura is an open source software designed by Ultimaker, it is a 3D printing slice software. Every model you design for print must be translated by slice software into instructions your 3D printer will understand. If you need a 32bit version, please access to Ultimaker’s official website for downloading.
-
The latest Mooz Firmware V1.4.5 (this is for MOOZ-1z, MOOZ-2z, MOOZ-2z full version) has been increased the default zero point height of the new machine to prevent the customers damaging hot bed when they excute the direct printing without setting Zero point. Since we are constantly optimizing the firmware to fix the bugs and add features suggested by our customers, please be sure to update your Mooz with the latest firmware for better user experiences.
- MoozStudio is a specially designed slicer software for laser engraving and CNC carving.
MOOZ-1
MOOZ-2
MOOZ-1 enhanced version
MOOZ-1 Upgrade
MOOZ-2 Education Edition
MOOZ-2 enhanced version
MOOZ-3
MOOZ-3 Upgrade
- The main changes in this firmware are:
1. Optimize the color mixing effect
2. Fix the problem that the Z axis will not rise when the power is turned off during printing;
3. After repairing the screen calibration, you cannot enter the mixed color print interface and other issues; -