The print version of USER MANUAL shipped along with the machine may not be the latest, please take it for reference and follow the instructions here to prevent misoperation.
Download center for MOOZ: https://www.dobot.cc/downloadcenter/dobot-mooz.html#most-download
- Setup of the machine.
Link of Tutorial Videos:
https://www.dobot.cc/downloadcenter/dobot-mooz.html#most-download
- 3D Printing
- 3-Point Leveling
Link of Tutorial Videos: https://www.dobot.cc/video/tutorial-how-to-operate-three-point-calibration.html
- Set the Zero Point
Link of Tutorial Videos:
https://www.dobot.cc/video/tutorialhow-to-set-the-zero-point.html
- Install the Filament
Link of Tutorial Videos:
https://www.dobot.cc/video/tutorialhow-to-install-and-uninstall-filament.html
- Use the Slice Software to Make Ready-to-Print Gcode Files
Link of Tutorial Videos:
https://www.dobot.cc/video/tutorialhow-to-install-cura-and-set-up-configuration.html
Please refer to the print version user manual for operation steps.
We have provided 2 ready-to-print test files to spare you the trouble of installing and configuring the software, please skip this section if you decide to use them.
- 3D_Print_Test_Dorus.gcode
-
Time needed: About 4h
Filament needed: About 23g
- 3D_Print_Test_Skull_Art.gcode
Time needed: About 13h
Filament needed: About 39g
- Start to Print
Please make sure your machine has been correctly leveled and zeroed before any printing attempts.
1. Copy the Gcode file (test files we provided or ones made by yourself) to your SD card or U disk.
- Laser Engraving
Link of Tutorial Videos:
https://www.dobot.cc/video/tutorial-how-to-laser-engrave.html
- Install the laser head and fix the workpiece
- Set the zero point
- Use MOOZStudio to make ready-to-engrave Gcode files
Please refer to the print version user manual for operation steps.
We have provided 2 ready-to-engrave test files to spare you the trouble of installing and configuring the software, please skip this section if you decide to use them.
- Laser_Test_GOTDragon_X60_Y60mm.gcode
Size: 60mm*60mm
- Laser_Test_Carton_girl_X50_Y75mm.gcode
Size: 50mm*75mm
- CNC Carving
Link of Tutorial Videos:
https://www.dobot.cc/video/tutorial-how-to-cnc.html
- Install the CNC head, CNC platform, and workpiece
- Install the CNC bit
- Set the zero point
- Use MOOZStudio to make ready-to-carve Gcode files
Please refer to the print version user manual for operation steps.
We have provided 2 ready-to-carve test files to spare you the trouble of installing and configuring the software, please skip this section if you decide to use them.
CNC_Test_MoozLogo_X40_Y60_Depth2mm(2x1 layer).gcode
Size: 40mm*60mm
Total depth: 2mm
Total layers: 1
Depth per layer: 2mm
CNC_Test_unicorn_X40_Y60_Depth3mm(1.5x2 layer)
Size: 40mm*60mm
Total depth: 3mm
Total layers: 2
Depth per layer: 1.5mm