5.2.4        Connecting Network Cable

In addition to the USB to serial line, you can also use a network cable to connect Dobot M1 and PC, but both connection ways cannot be supported at the same time, to avoid connection failure. The IP address of Dobot M1 and PC must be in the same network segment when connecting them with the network cable.

NOTICE

If you has connected Dobot M1 and PC with the USB to serial line, you cannot connect them with a network cables. You have to connect Dobot M1 and PC either with a USB to serial line or with a network cable. Otherwise, it will cause the connection to fail.

 



Related Topics
5.2.4.1 Connecting directly
5.2.4.2 Connecting Via Router











 Issue V1.2.1 (2019-04-10)User GuideCopyright © Yuejiang Technology Co., Ltd