DOWNLOAD CENTER

In order to run Dobot, please download the softwares and files according to your Dobot Arm’s Model..
Most Frequent Download
Access multiple resources about DOBOT. If you have other questions,please contact us .
Most Frequent Download
Dobot Scratch  v1.3.1
DobotScratch-Setup-1.3.1.exe    2020. 01. 19
156 MB
Newly launched DobotScratch software, users get to program robots and other Dobot hardware devices simply by dragging and dropping. That said, users can have every movement of the robot at their fingertips while having fun exploring and learning AI and other technologies.
156 MB
  • Dobot Scratch v1.3.1
    DobotScratch-Setup-1.3.1.exe    2020. 01. 19
    156 MB
    Newly launched DobotScratch software, users get to program robots and other Dobot hardware devices simply by dragging and dropping. That said, users can have every movement of the robot at their fingertips while having fun exploring and learning AI and other technologies.
    156 MB
    View Previous Versions
    Dobot Scratch v1.3.0
    DobotScratch-Setup-1.3.0.exe    2020. 01. 13
    157 MB
    164158060
  • Magician Studio v1.9.1
    DobotStudioSetup1.9.1.exe    2020. 02. 19
    298 MB
    1.Added a device selection box on the main interface, which is compatible with four device types: Magician, Magician Lite, Magic Box + Magician Lite, and Magic Box.
    2.Magician keeps the original function unchanged.
    3.The SVG format file on "Write&Draw" module only adapts SVG content as path tags, not image and text tags.
    4.Deleted "Show Console When StartUp" option in "General" tab.
    5.When upgrading the firmware through "Firmware" tab, you need to connect the device on the main interface first.
    6.Deleted the serial port selection box in "Firmware" tab.
    7.Deleted "QueueCmd", "Alarms", "HandTeach", "CP", "TRIG", "AngleSensor", "WIFI" API on Magician device types and script control module.
    8.When the device is connected, the script control module added the current cursor position right button to add the current coordinate of the robot arm.
    9.When the device is connected, the motion block of the "Blockly" module is added with a right-click to add the current coordinate function.
    10.Fixed the bug that the picture disappeared after "Grayscale Adjustment Range" was changed on "LaserEngraving" module.
    11.The end offset can be set to positive and negative values.
    298 MB