OCEANS OF

Dobot Arm V1.0 Quick Start Guide

By Apr, 11, 2017
13 VOTES 161 VIEWS
13 VOTES
161 VIEWS
storefront-2.1.8-zh_TW.zip
2017. 04. 11
12.25 kb
ALARM definition for Dobot Magician. The controller will monitor the system status in all Dobot products. The external software can read or clear the related alarm status according to this file.
12.25 kb

Dobot Magician 3D Printing Contest

Dobot can import PLT file to write or engrave. In this process, one can use CoreDRAW to make PLT file, forming into personalized patterns or texts.
import PLT file to write or engrave. In this process, one can use CoreDRA.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer nec odio. Praesent libero. Sed cursus ante dapibus diam. Sed nisi. Nulla quis sem at nibh elementum imperdiet. Duis sagittis ipsu
Dobot can import PLT file to write or engrave. In this process, one can use CoreDRAW to make PLT file, forming into personalized patterns or texts.
import PLT file to write or engrave. In this process, one can use CoreDRA.
Steps:
  • 1.Use CoreIDRAW to make.CDR file
  • 2.Transfer CDR file into .PLT
  • 3.Import .PTL Apllication to write or engrave
1.Open CorelDRAW and click on the “New” button to create a .CDR document, as shown in Figure 1.
2.In the popup dialog, rename a document, choose paper size, press default setting of other parameters, and click OK.

Figure 1 New Document

Figure 2 New Document

Steps:
  • 1.Use CoreIDRAW to make.CDR file
  • 2.Transfer CDR file into .PLT
  • 3.Import .PTL Apllication to write or engrave

1.Go to .generated CDR document in 7.1, select Save As .PLT filr, as shown in figure 7

2.In the popup dialog, select plotter origin as upleft, unit as 1016, and click ok, as shown in figure 9.

3.Open CorelDRAW and click on the “New” button to create a .CDR document, as shown in Figure 1.

4.In the popup dialog, rename a document, choose paper size, press default setting of other parameters, and click OK.

  • Figure 1 New Document

  • Figure 1 New Document

  • Figure 1 New Document

Steps:
  • 1.Use CoreIDRAW to make.CDR file
  • 2.Transfer CDR file into .PLT
  • 3.Import .PTL Apllication to write or engrave

To draw a straight segment, click where you want to start the line segment, and click where you want to end it.

To draw a curved segment, click where you want to place the first node, and drag the control handle to where you want to place the

next node. Release the mouse button, and drag the control handle to create the curve you want.

Double click to finish the line.

Please write well texts first, and then copy them, fine tuning by shape tool.


COMMENTS: 0 161 1
Comments . 0